Waterproofing & protection
Waterproofing & protection
Zrete Modified Silane MS Sealant
Our modified silane MS sealant locks in joints for precast concrete builds with lasting flex.
Review technical parametersSINO-SINAZrete Modified Silane MS SealantVerified product main image pending
Product overview
Performance and application overview.
Why MS Sealant Stands Out in Construction
Need weather resistant MS sealant for tough joints? This high elasticity joint filler delivers non-staining results in PC setups.
Technical parameters
Original product values for technical screening.
Values are reproduced without keyword editing. Final selection must follow the current approved technical data sheet, test method and project conditions.
The source page publishes a value or range but does not identify it as a minimum or a typical result. It is therefore retained as a published value pending TDS confirmation.
| Item | Unit | Value |
|---|---|---|
| Tack-Free Time | h | ≤8 |
| Extrudability | mL/min | ≥150 |
| Elastic Recovery | % | ≥70 |
| Tensile Modulus 23°C | MPa | ≤0.4 |
| Tensile Modulus -20°C | MPa | ≤0.6 |
| Fixed Elongation Adhesion | - | No damage |
| Durability Fixed Elongation Adhesion after Water Immersion | - | No damage |
| Cold Draw-Hot Press Adhesion | - | No damage |
| Salt Fog Fixed Elongation Adhesion (480h) | - | No damage |
| Alkali Fixed Elongation Adhesion (168h) | - | No damage |
| Fluorescent UV Fixed Elongation Adhesion (300h) | - | No damage |
| Xenon Lamp Aging Adhesion (6 cycles) | - | No damage |
| Pollution Width | mm | ≤1.0 |
| Pollution Depth | mm | ≤1.0 |
| Mass Loss Rate | % | ≤3 |
Product usage
Application and installation guidance.
Apply to clean PC board joints or window frames with primer for tight seals.
Construction Process
Clean base, fill backing, tape edges, prime surface, apply sealant, tool smooth, remove tape.
Why Our MS Sealant?
Crews like its easy handling in cold or heat, plus no oil bleed for clean paints.
Technical enquiry
Check whether Zrete Modified Silane MS Sealant matches your project.
Include foundation type, grout geometry and volume, strength ages, flow requirement, temperature, standards, placement distance and equipment.