Ground & underwater engineering
Ground & underwater engineering
EGM-100S Underwater Epoxy Grout
EGM-100S Underwater Epoxy Grout is a Sino-sina engineering material developed for precision grouting and load transfer beneath machinery, baseplates and structural steel interfaces.
Review application and selection guidanceSINO-SINAEGM-100S Underwater Epoxy GroutVerified product main image pending
Product overview
Specified around the application.
EGM-100S Underwater Epoxy Grout is a Sino-sina engineering material developed for precision grouting and load transfer beneath machinery, baseplates and structural steel interfaces.
Product selection should consider pour depth, clearance, bearing load, operating temperature, chemical exposure and installation window. The installation method and acceptance criteria must be confirmed against the current technical data sheet and project specification.
Typical applications
Where this material is considered.
- Machinery and equipment baseplates
- Anchor bolts and structural steel details
- Dynamic-load and vibration zones
- Underwater placement where the selected grade permits
System benefits
What the product route is designed to provide.
- High mechanical load-transfer potential
- Strong bond to prepared concrete and steel
- Low-shrinkage resin system
- Grades for conventional or underwater placement
Selection & specification
Checks required before approval.
Technical values are not estimated on this page. Use only the current approved technical data sheet, test report and project specification for product acceptance.
01Verify component ratio and aggregate route
02Confirm maximum pour depth and exotherm control
03Check substrate temperature and moisture
04Use approved strength and chemical-resistance data
Technical enquiry
Request the current technical data for EGM-100S Underwater Epoxy Grout.
Include foundation type, grout geometry and volume, strength ages, flow requirement, temperature, standards, placement distance and equipment.